///CASCADE
/// Descripción
El controlador Cascade ofrece control automático de arranque y parada con una configuración sencilla para una amplia variedad de aplicaciones.
Este controlador de arranque automático está diseñado para adaptarse a cualquier aplicación impulsada por motor que requiera una secuencia de arranque y parada automática simple y robusta. Bombas, compresores, trituradoras, unidades de potencia y generadores son solo algunas de las aplicaciones industriales del controlador. El controlador Cascade es totalmente compatible con los principales tipos de motores. Ya sea que utilice motores mecánicos o J1939, el controlador funcionará con su aplicación. El controlador Cascade CD101 también se puede utilizar para reemplazar los controladores heredados ASM150, ASM160 y ASM170.
- Power input: 9-35VDC continuous - operates during total blackout for 2 seconds minimum.
- Power consumption: Sleep Mode (Manual): 1mA typical; Sleep Mode (Automatic): 4mA typical.
- Running Mode (Manual): 20mA typical; Running
- Mode (Automatic): 24mA typical.
- Operating/Storage temperature: -40 to 85°C; (-40 to 185°F).
- Humidity: 0-100%, non-condensing.
- Housing: UV stabilized black polycarbonate and epoxy encapsulation. Weather tight and includes sealing gasket to keep moisture and debris out of enclosure. Properly mounted controller will maintain NEMA4 / IP65 rating of enclosure.
- Vibration: Rated to 6G.
- Impact: Rated to 10G.
- Inputs: Dedicated digital inputs for low oil pressure, high engine temperature, remote start, DC charge fail/Alternator fail. Two aux inputs are configurable for multiple functions.
- Outputs: 7 – 4 auxiliary, configurable (1A DC protected). 3 dedicated outputs for Crank, Fuel/ECU, Alternator excitation.
- Crank attempts: 3, 5, 10, Continuous.
- Crank Rest: 5-60 seconds, adjustable.
- Shutdown lockout time delay: 5, 10, 15, 20, 25, 30 seconds.
- Crank disconnect speed setting: Field settable 0-9999 RPM (16-60Hz AC freq input).
- Overspeed/underspeed trip point setting: ±5 to 50% of nominal.
- Speed sensing inputs: Magnetic pickup (5-120VAC RMS / 0-10 kHz) & AC frequency (30-600VAC RMS / 16-80 Hz).
- CANbus interface: Directly reads engine speed, & engine status data* from SAE-J1939 enabled engines.
- MODbus interface: In J1939 applications drives PVA series analog gages.